Dedicated specifically to washing nets, taking into account the weight and volume of these, an appropriate design was made for its loading and unloading of the drum.

The drum made entirely of stainless steel. AISI-316 has a double leaf door with a free gap, mounted with hinges and frisan with rubber gaskets and safety lashings necessary in the rotation of the drum. Rotation axes are inserted into the drum side covers with their necessary reinforcements., that also fulfill the functions of driving axle and water inlet conduit for washing.

It has two rows of sleeves of 1″ RG, that allow the water to escape in the wash and putting the plugs on it, the retention of liquids for treatments against algae and antiparasites of the nets.

The drum turns, supported on two bearings with bearings, on a structure built in sheet metal and square tubes of welded carbon steel, On this structure, a protection grid with doors will also be mounted to access the drum door.. A security lock will be installed on the gate doors, so that in case if you accidentally open the gate, the drum stops spinning instantly. The relative position of the drum door can be varied, by means of a device installed in the electrical panel.